In automotive manufacturing, individual process operations directly affect production flow, output quality and operator workload. Processes that require parts to be loaded correctly, processed precisely, labelled and safely transferred to the next stage are typical candidates for targeted automation. This was exactly the task addressed by the DAT Flat robotic workstation for Mubea.
Client Profile
Mubea is an international family-owned company and automotive supplier specialising in lightweight structures, high-strength spring components and related products.
We carried out the project for Mubea, spol. s r.o., headquartered in Žebrák, specifically for the division focused on manufacturing V-belt tensioning systems. These are among the plant's core products.
Project Brief
One of Mubea's manufacturing processes involved applying lubricant to a friction surface and then applying a production label. The customer needed to make this process more precise, improve control over it and reduce its dependence on manual work.
Lubrication was originally carried out manually. The operator set the rotary nest in motion and applied lubricant to the part by pressing a button. The quantity was checked by weighing, but distribution across the surface depended primarily on the individual operator's skill in spinning the nest. The results were therefore not consistent enough.
The aim was to ensure repeatable lubricant dispensing and traceability of individual production steps, while improving the efficiency of the overall process. In addition to lubrication, the new workstation was to handle putting the parts together into an assembly, applying an identification label and verifying it.
Challenges and Requirements
Precise lubrication: The lubricant must reach the specified friction surface, and its quantity must meet the tolerance set by quality control. When releasing the process for series production, the dose is verified by weighing a reference sample to a precision of one hundredth of a gram.
Reliable handling: Each part must be loaded into the correct nest and in the correct orientation. Sensors check its presence, and its position must remain repeatable throughout the process.
Precise labelling and traceability: The production label must be applied in a precisely defined position. A Data Matrix code reader then checks its position, readability and code uniqueness.
Safe and efficient operation: The operator needs easy access to load parts and remove the completed assembly without entering the automated section of the workstation. The entire cycle also had to take under 30 seconds.
Proposed Solution
KINALI designed a robotic workstation built on the Test-it-off platform. The solution combines the machine's mechanical structure, robotic handling, lubrication technology, part identification devices, a safety circuit and a user interface.
Production Cycle
The workstation combines manual loading of three parts with automated handling, lubrication and label verification for the completed assembly. The cycle consists of four consecutive steps:
Manual Part Loading
The operator places the three assembly parts into locating nests on the outer side of the rotary transfer table. Locating features and sensors ensure that each part can only be loaded in the correct position and orientation. Once the operator leaves the area protected by the light curtain, the table rotates and transfers the parts into the guarded section of the workstation.
A wedge locking mechanism ensures precise positioning of the table after rotation. This gives the parts the same starting position in every cycle for robotic handling and subsequent process operations.
Automated Parts Handling
Inside the workstation, parts are handled by an AUBO i5 cobot equipped with a pneumatic multi-gripper. The cobot is mounted on the main frame, and its gripper is adapted to the individual assembly parts. The gripper assembly incorporates a compensation unit intended to improve handling reliability during the cycle.
Precise Lubricant Application
A pump feeds Berulub FK 164-2 lubricant from the reservoir to the Walther pulse lubrication system. A nozzle dispenses lubricant onto the specified friction surface, while the rotary nest turns the part during application to help achieve more even distribution.
For each pulse, the lubrication system monitors pressure, temperature and dispensing needle position. These data make it possible to check retrospectively whether lubricant application proceeded correctly.
Labelling and Verification
The completed assembly receives a production label from a label printer and applicator. A Keyence reader then checks the label position, Data Matrix code readability and consistency with the unique production identifier.
Once all operations are complete, the table rotates back towards the operator. The operator removes the finished assembly and can load parts for the next cycle at the same time.
Workstation Components
| Robot | Collaborative robot AUBO i5 Handles parts between individual process positions for lubrication assembly and labelling operations |
| Pneumatic multi-gripper | Grips the three parts of the final assembly Contains three separate grippers Ensures a repeatable grip even within the limited space of the nests |
| Rotary transfer table | Safely transfers parts between the operator and the automated section of the workstation Each side contains three locating nests A wedge mechanism ensures repeatable positioning |
| Rotary nest | Rotates the part during lubricant application Helps distribute lubricant evenly across the friction surface |
| Walther lubrication system | Pulse dispensing of Berulub FK 164-2 lubricant Monitors pressure, temperature and dispensing needle position Enables retrospective evaluation of each dispensing pulse |
| Zebra label printer and applicator | Prints and applies the production label Each assembly receives a unique production identifier Supplied by Mubea and integrated into the process by KINALI |
| Keyence Data Matrix code reader | Checks the production label and Data Matrix code Verifies code position and readability Links the assembly to its process operation records |
| Test-it-off platform | Controls the entire production process through a single interface Manages production recipes and user roles Displays hardware status, notifications and operator instructions |
| Safety system | Separates the operator area from automated operations Guards, safety door locks, a light curtain and sensors Controlled by a Siemens safety PLC |
Explore our range of accessories for AUBO robots.
The Role of Test-it-off
Test-it-off acts as the workstation's control and operator interface layer. The platform brings together application logic, communication with individual hardware devices and the user interface used to select and start projects. Each project corresponds to a production recipe and guides the user through workstation setup.
The user interface distinguishes between three roles:
| Role | Purpose and Permissions |
| Viewer | A role for day-to-day operators. Displays the information needed for operation, statistics, notifications and instructions for routine interventions. |
| Editor | A role for setup technicians. Allows users to start and stop production projects and resolve situations requiring higher-level permissions. |
| Owner | An administrator role for system management and advanced configuration. |
On the Hardware tab, authorised users can monitor the status of individual workstation components and control them according to their role.
Safety Concept
The safety system combines physical guarding, safety door locks and a light curtain with safety sensors and a Siemens safety PLC. During normal operation, triggering the protective devices causes a safe stop or restricted operation, depending on the defined state.
For the operator, the rotary transfer table's status indication is particularly important. Green indicates that it is safe to load or remove parts. Red indicates movement or a non-standard table position, in which reaching through the light curtain would trigger a safety event. Blue replaces the red indication in service mode.
Project Implementation
We designed the workstation as a standalone robotic cell with a protective frame and guards. It requires no floor anchoring or special vibration isolation measures. Installation requires only a firm, level surface, an electrical connection and a compressed air supply. KINALI handled assembly, positioning, adjustment and commissioning at the customer's site.
The project proceeded through several consecutive phases:
- August: concept presentation and approval to proceed
- September to November: hardware and workstation functionality design
- November to January: equipment manufacture and assembly
- January to March: commissioning, testing, installation at the customer's site and production start-up
A Focus on Process Repeatability
One of the main technical challenges was to ensure that the parts had a precise and repeatable position relative to the robot, lubrication head and other devices in every cycle. We therefore equipped the nests with locating pins and sensors to check that the parts were loaded correctly. After each rotation, the rotary transfer table is locked by a wedge mechanism that stabilises its final position.
The control software continuously evaluates the status of individual workstation components and responds to abnormal events. For example, if a safety interruption occurs during a process operation, the part being processed is separated from the normal production flow. This prevents an assembly from proceeding when the correct completion of all operations cannot be reliably confirmed.
Clearly Defined Roles Simplify Operation
The workstation is operated through the Test-it-off platform. A setup technician with the Editor role selects the appropriate production project, runs the initial procedure and, if necessary, verifies the lubricant dose on a reference sample. Once preparation is complete, the workstation is handed over to the operator.
Operators use the Viewer role, which gives them access to the information and actions needed for routine production but does not allow them to start or stop production projects. Certain abnormal events and system dialogues can only be resolved by a setup technician with higher-level permissions.
Although the system was new and relatively complex for the customer, its wizards, clear dialogues, and clearly defined permissions enabled operators to use it after a brief training.
Results and Impact
Automation replaced manual lubrication with a controlled, repeatable process. Locating nests ensure precise part positioning, sensors check correct loading, and the pulse system records data for every lubricant dose. The workstation therefore reduces the dependence of the outcome on an individual operator's skill and helps maintain consistent quality throughout production.
Combining lubrication, handling and labelling in a single cycle also improved operational efficiency. The workstation achieves a cycle time of 28 seconds, below the required 30-second limit, and has freed up the capacity of one employee in a three-shift operation. The operator focuses solely on loading parts and removing completed assemblies.
Each assembly can also be traced using its unique serial number. The system thus provides production traceability throughout the entire process. After the label is printed, a separate CSV file is created and progressively populated with data on printing, Data Matrix code verification, lubrication and other process operations. Once the cycle is complete, the file is moved to shared storage, from which the next machine in the production process retrieves it.
Alongside automated lubrication, the workstation therefore connects production data with individual process steps. It supports Industry 4.0 principles, particularly digital production traceability and data exchange between successive machines.
Lessons from the Project
This project confirmed that choosing the right robot and lubrication technology is not enough for applications of this kind. Reliability depends above all on precisely coordinating part positioning, nest design, sensors, safety logic and software control. In particular, repeatable part loading and an unambiguous response to every abnormal situation need to be addressed from the earliest design stages.
The project also confirmed the importance of the transfer interface between the operator and the automated process. A well-designed rotary table, clear status indication and clearly separated permissions for operators and setup technicians keep the operator's work simple without reducing control over the process.
Customer Testimonial
“The new workstation helped us combine several operations into a single controlled process and increase production line productivity and improve final product quality by giving us greater control over the process. Combining several production operations in one station also saved space on the factory floor, modernised the line and created a more pleasant environment for our production staff. The resulting solution also met the required production cycle time and reduced the amount of manual work needed.” Jan Prax, Industrial Engineering Manager
Conclusion
The robotic workstation for Mubea brought handling, precise lubricant dispensing, labelling and verification together into one cycle. The result is a more repeatable process with a cycle time of under 30 seconds, full traceability of every processed unit and capacity savings of one employee in a three-shift operation.
The project also shows that reliable automation depends not only on the robot but on precise coordination of mechanics, sensors, safety and software control. The same principle can be applied to other operations combining manual part loading with precise, controlled processing.
Looking to Automate a Similar Process?
Let's discuss the possibilities for automation in your production. info@kinali.cz and together we can find a suitable solution for automating your production.











